User:LABoyd2

= This is my personal reference library. = It is intended to hold:

My contributions to the OpenSCAD users manual.

 * 1) User:LABoyd2/Boolean 150919
 * 2) User:LABoyd2/2D objects 150919
 * 3) User:LABoyd2/polygon 150925
 * 4) User:LABoyd2/3D objects 150919
 * 5) User:LABoyd2/cylinder 150920
 * 6) User:LABoyd2/cylinder over mid 150922
 * 7) User:LABoyd2/cylinder 150924
 * 8) User:LABoyd2/polyhedron 160302
 * 9) User:LABoyd2/Vector stand alone page 150927
 * 10) User:LABoyd2/Vector from manual 150927
 * 11) User:LABoyd2/Vector to manual 150928
 * 12) OpenSCAD User Manual/General
 * 13) User:LABoyd2/General from manual 151002
 * 14) User:LABoyd2/General to manual 151003
 * 15) User:LABoyd2/General introduction 151005
 * 16) OpenSCAD User Manual/Conditional and Iterator Functions
 * 17) User:LABoyd2/Conditional and Iterator Functions from manual 151002
 * 18) User:LABoyd2/Conditional and Iterator Functions to manual 151002
 * 19) User:LABoyd2/If to manual 151006
 * 20) User defined function and modules
 * 21) User:LABoyd2/modules from manual 151008
 * 22) User:LABoyd2/functions from manual 151008
 * 23) User:LABoyd2/function, module to manual 151016
 * 24) User:LABoyd2/function, module,children to manual 151031
 * 25) User:LABoyd2/function, module from manual 160328
 * 26) Manual Contents
 * 27) User:LABoyd2/contents from OpenSCAD_User_Manual 151106
 * 28) User:LABoyd2/revised OpenSCAD_User_Manual 151108
 * 29) User:LABoyd2/contents from The_OpenSCAD_Language 151106
 * 30) User:LABoyd2/revised The_OpenSCAD_Language 151113
 * 31) User:LABoyd2/new import file 151111
 * 32) User:LABoyd2/Import . . . . . . . . . . . . . . Spare File
 * 33) User:LABoyd2/contents from Print version 151106
 * 34) User:LABoyd2/User Manual Print all 151110
 * 35) Polyhedron̽
 * 36) User:LABoyd2/polyhedron from manual 160313̽
 * 37) User:LABoyd2/polyhedron to manual 160313
 * 38) Special Variables
 * 39) User:LABoyd2/special variables from manual 160316̽
 * 40) User:LABoyd2/special variables to manual 160316

Misc other
MyIntroduction
 * 1) 1 some markup
 * https://www.mediawiki.org/wiki/Help:Magic_words
 * 1) 2 vector interpolate
 * ufomorace wrote
 * Lerp Linearly interpolates between two vectors.
 * LerpUnclamped Linearly interpolates between two vectors.
 * For this, check out my code and it's result here:
 * http://forum.openscad.org/Irregular-mesh-generated-tp13765p13779.html
 * 1) 3 libraries
 * Not a single library, but a number of libs and designs with
 * some quite interesting functions:
 * http://www.thingiverse.com/WilliamAAdams/designs
 * e.g.:
 * Geodesic Maths for OpenScad - v0.1
 * http://www.thingiverse.com/thing:10540
 * Quaternions for OpenScad
 * http://www.thingiverse.com/thing:10249
 * ciao, Torsten.
 * 1) 4 regular shapes
 * use 
 * egg(20, 20*1.39);
 * There is a bug.
 * Edit the library, near the bottom in module egg change the cube to square.
 * Also prob. good to comment out the test just below.
 * 1) 5 beginners tutorial
 * http://edutechwiki.unige.ch/en/OpenScad_beginners_tutorial
 * 1) 6 Wallace
 * http://kitwallace.co.uk/openscad/workshop-2015-03-03.html
 * 1) 7 Rendering_a_gallery_of_images
 * https://www.mediawiki.org/wiki/Help:Images#Rendering_a_gallery_of_images
 * 1) 8 undersize holes
 * http://hydraraptor.blogspot.com.au/2011/02/polyholes.html
 * 1) 9 ''' Pages that link to "OpenSCAD User Manual/Modules"
 * OpenSCAD User Manual ‎ (← links | edit)
 * OpenSCAD User Manual/The OpenSCAD Language (transclusion) ‎ (← links | edit)
 * OpenSCAD User Manual/Command Glossary ‎ (← links | edit)
 * User:KevinCole/Collections/OpenSCAD ‎ (← links | edit)
 * OpenSCAD User Manual/Print version (transclusion) ‎ (← links | edit)
 * 1) 10- Print Version
 * Found the order part of the problem. There are 3 independent list for the order of files which make up the manual.
 * First is the OpenSCAD_User_Manual at the beginning of the manual.
 * Second is OpenSCAD_User_Manual/The_OpenSCAD_Language which determine the order for the on line version.
 * Third is OpenSCAD User Manual/Print version which determines the order for the print version.
 * The print version has all the section headings missing.
 * 1) 11 - Import
 * > OpenSCAD can now export STL, OFF, AMF, DXF, SVG, CSG and PNG (image).
 * STL, OFF and DXF are imported using import.
 * CSG can be imported using include<>
 * PNG can be imported using surface
 * We have open pull requests for SVG and AMF, which require a bit more work/testing.
 * We require a valid file suffix to determine type, but that’s possible to improve.
 * Third is OpenSCAD User Manual/Print version which determines the order for the print version.
 * The print version has all the section headings missing.
 * 1) 11 - Import
 * > OpenSCAD can now export STL, OFF, AMF, DXF, SVG, CSG and PNG (image).
 * STL, OFF and DXF are imported using import.
 * CSG can be imported using include<>
 * PNG can be imported using surface
 * We have open pull requests for SVG and AMF, which require a bit more work/testing.
 * We require a valid file suffix to determine type, but that’s possible to improve.
 * We have open pull requests for SVG and AMF, which require a bit more work/testing.
 * We require a valid file suffix to determine type, but that’s possible to improve.
 * We require a valid file suffix to determine type, but that’s possible to improve.