User:CFeyecare/sandbox

Wikibooks
=OpenBSD as a Desktop=

This is a guide on using OpenBSD as a desktop/workstation. This guide was made using OpenBSD 4.3 and 4.4. The concept should be the same in future releases.

If you are new to unix
Download the OpenBSD iso file and burn it using an iso burning program.

The download location is: ftp://ftp.openbsd.org/pub/OpenBSD/ / /install44.iso

In my case it is: ftp://ftp.openbsd.org/pub/OpenBSD/4.3/i386/install44.iso

Now put the cd into the computer you want to install it on. Once it boots up quickly push F2 (this is called the BIOS). Find the boot sequence option (or similar) and select boot to cdrom. I recommend learning at least the basic commands and some vi beforehand.

Installation modifications
Follow the offical OpenBSD install instructions found here. Until you come to "Configure the network?". Enter: yes [default], fxp0 [default], system-hostname [default], no [default], dhcp, rtsol, home [default], 192.168.1.1 [default], yes [default], dhcp [default], no [default], no [default]. Continue until you come to the "lets install the sets". Enter: cdrom, cd0, 4.3/i386 [default], all, done [default], yes [default]... done [default], yes [default], none [default], yes, no [default], ?,, ?, . Enter in "reboot" and your done!

Configuring Xorg
Xorg normally "just work". If you have a weird screen resolution (or things look weird with xorg), then you need to do more configurations.

Method 1
The configuration file is located at /etc/X11/xorg.conf. However first we need to create the file. Run: Xorg -configure

This created a configuration file in your home file. To test the Xorg setting in the configuration file, run: Xorg -config / /xorg.conf.new

In my case it is (running as root) Xorg -config /root/xorg.conf.new

It could be (running as puffy) Xorg -config /home/puffy/xorg.conf.new

To exit out of the test (assuming it worked), press (control)+(alt)+(backspace). If things work, you are lucky. Copy the new configuration file to the /etc/X11/xorg.conf cp //xorg.conf.new /etc/X11/xorg.conf

Extra configurations
If you were not fortunate enough to have the configurations just work then...

I am working on it: '''I am currently figuring this one out myself. The xorg works however everything is out of proportion.'''

Method 2
This method will require knowledge of your graphics card, screen resolution, and monitor. Run the command: Xorgconfig

Fill out all of the information. If you would like to skip over something then just press enter. In some cases you can not skip steps without messing up your configuration file. At the end of the questionare say "yes" to writing to the xorg.conf file.

Get a desktop enviroment working
OpenBSD has a great package management system (even if it is sometimes outdated). If you get the packages from the ftp site the pkg_add will find the dependencies for you. Export your PKG_PATH to your favorite ftp site. The ftp format is:

ftp:// /pub/OpenBSD/ /packages/ /

In my case it is:


 * 1) export PKG_PATH=ftp://ftp.openbsd.org/pub/OpenBSD/4.3/packages/i386/

You may even want to put this into your .profile.

The packages are found through http here (for 4.3 packages). The packages are also found through ftp here (for 4.3 i386 packages).

KDE (3.5)
Here are the main packages the pkg_add should resolve the dependencies.


 * kdebase
 * kdelibs
 * kdeaddons
 * kdeadmin
 * kdeartwork
 * kdeedu
 * kdegames
 * kdegraphics
 * kdemultimedia
 * kdenetwork
 * kdepim
 * kdesdk
 * kdetoys
 * kdeutils
 * kdeaccessibility

I personally prefer to install them all at once. You may also want to add the -v option, if you want to see the details of the installation.

pkg_add kdebase;pkg_add kdelibs;pkg_add kdeaddons;pkg_add kdeadmin;pkg_add kdeartwork;pkg_add kdeedu;pkg_add kdegames;pkg_add kdegraphics ;pkg_add kdemultimedia;pkg_add kdenetwork;pkg_add kdepim;pkg_add kdesdk;pkg_add kdetoys;pkg_add kdeutils;pkg_add kdeaccessibility

To run kde do

Startkde

Xfce (4.4)


Here are the main packages the pkg_add should resolve the dependencies. (Xfce likes to keep their applications in separate packages)
 * gtk-xfce-engine
 * libxfce4mcs
 * libxfcegui4
 * xfce-mcs-manager
 * xfce-mcs-plugins
 * xfce-utils
 * xfce4-appfinder
 * xfce4-battery
 * xfce4-clipman
 * xfce4-datetime
 * xfce4-dict
 * xfce4-diskperf
 * xfce4-fsguard
 * xfce4-icon-theme
 * xfce4-genmon
 * xfce4-mailwatch
 * xfce4-mixer
 * xfce4-mpc
 * xfce4-netload
 * xfce4-notes
 * xfce4-panel
 * xfce4-places-plugin
 * xfce4-session
 * xfce4-systemload
 * xfce4-time-out
 * xfce4-verve
 * xfce4-wavelan
 * xfce4-weather
 * xfce4-wmdock
 * xfce4-xkb
 * xfdesktop
 * xfwm4
 * xfwm4-themes

To run xfce do

startxfce4

Using ports
Although the binaries are sometime out of date the ports are amazingly up to date, new software is ported to OpenBSD after hours of release.

First get the ports from the install cdrom. First we have to make a directory to mount the drive to. Enter in the command: cd /mnt mkdir cdrom

Mount the cdrom by entering in the command: mount /dev/cd0a /mnt/cdrom

Now copy ports.tar.gz to /usr: cp /mnt/cdrom/ports.tar.gz /usr

Now untar the ports: tar xvf ports.tar.gz

To update the port tree, cd into the file that you want to update and enter in the command: cd make checksum REFETCH=true

This may take a while...

To install a ports, cd into the CVS that you want to compile and do: cd make install clean

The port system should compile the dependencies for you. Warning: compiling may take several days. Most notibily the port system includes: e17 and KDE 4.1.

All of the ports are found: here

GDM (recomended)
Only one main package: pkg_add gdm

Now vi the configuration file "rc". Scroll down to the bottom of the configuration file. (it is a long configuration file):

vi /etc/rc

Scroll down until you see: if [ X"${xdm_flags}" != X"NO" ]; then echo 'starting xdm...';       /usr/X11R6/bin/xdm ${xdm_flags} fi
 * 1) Alternatively, on some architectures, xdm may be started in /etc/ttys

Edit it so that it will start gdm as opposed to xdm. Replace it with: if [ X"${xdm_flags}" != X"NO" ]; then echo 'starting gdm...';       /usr/local/sbin/gdm ${xdm_flags} fi
 * 1) Alternatively, on some architectures, xdm may be started in /etc/ttys

Now change the xdm flags in /etc/rc.conf. Scroll down until you see: xdm_flags=NO       # for normal use:""
 * 1) For some architectures, you must also disable console getty in /etc/ttys

Change the xdm flags by replacing the NO with "YES" xdm_flags="YES"       # for normal use:""
 * 1) For some architectures, you must also disable console getty in /etc/ttys

Once you start up gdm change the session to whatever GUI you installed.

Warning: GDM does not automatically recognize the KDE session.

KDM (not recomended)
The reason that this is not recomended, even if you are using KDE, is that someone made an error while porting KDM to OpenBSD. KDM searches for startkdeconfig in the wrong directory and you are thus locked out.

Authors
If you made a contribution to this article please feel free to add your username.
 * CFeyecare- Started page.