Template:Interlinear/doc

Basic usage
This template formats a linguistic interlinear glossed text: Nginda-rni ngaja-mi jurliji-rdarra diyim ka-rdu

DEM(M)-FOC see-IRR bird-PL fly 3SG-go

'Look at all the birds flying!'

Te ni-kekoo te̱e ún
 * On lines to be interlinearised, any wiki markup or templates should never span word boundaries. Мarkup or templates that apply to a sequence of words must be repeated for each word: (It is also possible to apply formatting to an entire line, see below)

And past-arrived.PL man he

"The men arrived"

The characters <, > and = should not be used directly. They can be substituted as follows:

To let a multi-word expression be treated as a single word, surround it in {curly brackets}. Similarly, use {} for an empty word: Dit is een voorbeeldje in het Nederlands

This is a {little example} in {} Dutch.

The template can be invoked with any number of unnamed parameters, which are interpreted as lines of text. If there is only one unnamed parameter, then it will be rendered in-line and treated as a gloss line:  gives: house-ATTR master-ABS. If they are more than one, then all will be interlinearised except the last one, which is assumed to be the free translation. To force the interlinearisation of all lines, supply an empty last unnamed parameter: Ù-dììny 	Juáàny 	bèʔcw.

COMPL-hit 	Juan 	dog

Layout
A line of text to be displayed above the interlinear block is given using top, one to be displayed immediately below the free translation is set using bottom. If any of these need to contain more than a singe line, then line breaks can be introduced using br. Example numbering can be set using number. The parameter consists in one or more characters to be displayed in the left margin. kʼetʼu-q ɣˤay ħaƛu-ł-xo

cat-POSS:ESS milk:ABS drink-POT-PRS

"The cat can drink milk."

The indentation of the interlinear block (measured in ems) can be modified using indent. Currently, the default value is 3 if number is set, and 0 otherwise. This behaviour is set to change: the next version of the template will apply indentation by default.

The spacing between consecutive word stacks can be adjusted using spacing; it is measured in ems and its default value is 1. To visually set off the interlinear display from surrounding text, the yes parameter can be used. It surrounds the whole interlinear text in a box with a wikitable-like background colour. Nyama-baji imimikin-bili-rni-rni ardalakbi-wurru-ju

DEM-PL old.woman-ANIM.DU-F-ERG hot-3PL-do

'The two old women feel hot.'

To add a comment after a given line, use cN (where N is the sequence of the line: the content of c1 will be appended at the end of first line, c2 – at the end of the second line etc.): Shte da e vidiyal

FUT COMPL AUX see.PTC.M.SG

'He must have seen it.'

Line formatting
Formatting can be set for an entire line using the styleN parameter, which applies CSS style properties to line N (style1 for the first line, style2 for the second one, etc): Įxę̀ę eya ı̨-lè

yesterday sick/painful PFV.3.SBJ-COP.PFV

'Yesterday he was sick.'

Similarly, CSS classes can be specified for line N using classN. Classes should be given without any quotation marks.

Italics are by default applied to the first line, unless disabled by no. Any line can be italicised using yes (where N is the number of the line). On italicised lines, tone numbers will be formatted as superscripts, unless tone-superscripting is set to no. To turn off italics for a particular word within an italicised line, use noitalic.

To specify the language of a given line, you can use langN (with N being 1 for the first line, 2 for the second one etc.). The parameter should be the ISO code of the language, as in the familiar Template:Lang. If the unnumbered lang is given, then it is applied to the first line. If line N employs IPA, then the effect of Template:IPA can be mimicked by setting yes. If transliteration has been used, then the transliteration scheme can be specified with the translN parameter (similarly to Template:Transl).

Glossing abbreviations
Linguistic glosses typically abbreviate grammatical category labels, like this: ACC, instead of the full name 'accusative'. The line containing such glosses is specified using yes (where N is the number of the line within the interlinear text). If no line is specified, then it is assumed such glosses are found in the second line (this can be bypassed with no). Within the lines so specified, any sequence of upper case letters will be interpreted as a grammar gloss and formatted in.

Additionally, the template will attempt to recognise the meaning of each abbreviation by looking it up in several places (more details below), and if the abbreviation is found, it will be formatted with a dotted underline and the "label" of this abbreviation will be displayed in a tooltip, like this: DAT. Alternatively, the abbreviation can be turned into a link to the Wikibook about the corresponding grammatical category, like this: DAT. To choose the latter behvaiour, use the following parameter: link. It is possible for separate lines to employ different styles, in this case the parameters used will be glossing2, glossing3, etc.

If a particular glossing abbreviation is to be treated differently from the rest, then gcl can be used: ngagun-yi nga-nanda-yi nung

1sg.NOM-ERG 1sgA.3sgO-see-PST 3sg.ACC

'I saw him/her.' ngagun-yi nga-nanda-yi nung

1sg.NOM-ERG 1sgA.3sgO-see-PST 3sg.acc

'I saw him/her.' In this example, marks up acc as a glossing abbreviation (it wouldn't have otherwise been interpreted as such because it is lower-case). is used to define the meaning of the unusual abbreviation 1sgA, which wouldn't be recognised even in upper case. displays the abbreviation as a link to the Wikibook. applies formatting to a part of a glossing abbreviation; if weren't used here then the wikimarkup would have forced P to be treated as a separate abbreviation from ST.

If the grammatical category labels are not abbreviated but written out in full (like that: ACCUSATIVE) then glossing should be set to no abbr, which will only apply small-caps formatting: wǒ yǐjing jiàn-guò {Zhāng Sān} le.

I already see-EXPERIENTIAL {Zhang San} RESULTATIVE.

Additional style parameters can be applied to all gloss abbreviations using glossing-style. The default formatting using small caps can be disabled with no, and the default underlining can be turned off using no. To exempt a particular abbreviation from being treated as a grammatical gloss, use no gloss.

The pesky boxes with glossing messages that are shown in preview mode can be turned off with no.

Custom abbreviations
The template recognises some of the most commonly used abbreviations. However, it is recommended to always specify the meaning of each abbreviation used. There are several ways to do that: wǒ yǐjing jiàn-guò {Zhāng Sān} le.
 * Defining at the article level. If an article uses a number of interlinearised examples and they share a set of abbreviations, then these can be defined once for the whole article using the following format:
 * The list can contain any number of abbreviations; if a wikibook needs to be specified, it is added after a colon, for example: NEG:negator:Negation (linguistics). This whole code can be placed anywhere in the article, but it is customary to put it at the end, after the references but before any categories. It is visible only in edit mode, it is not displayed in the article.
 * Defining at the level of a single instance of the template. This is done using abbreviations (or ablist). The list of custom abbreviations takes the same format as above: ABBREVIATION1:meaning1:wikibook1; ABBREVIATION2:meaning2:wikibook2... (specifying a Wikibook is optional and has no effect unless link):

I already see-EXP {Zhang San} RES.
 * Defining a single instance of an abbreviation. This is done using gcl, as seen above
 * Defining an abbreviation globally. This is done by the addition of an entry to the module's data page. The abbreviation will be recognised by any use of the templates, anywhere on the English wikibook. This should be done only for completely unambiguous abbreviations.

Troubleshooting
This is a list of problems that are likely to be encountered:
 * One of the lines went missing.
 * Does this line contain anywhere an equals sign? If yes, then all instances of the equals sign should be replaced with.


 * I've applied bolding/italics to a phrase and now the formatting is all over the place.
 * Any formatting should be applied separately to each word.


 * I receive the error "Mismatch in the number of words".
 * Interlinearised lines don't contain the same number of words. If this is intended, then consider filling the empty slots with {}. If this is not intended, then the following points might help track down the cause:
 * if formatting or a template is applied to a piece of text then this text is treated as a single word:
 * non-breaking spaces are not treated as word separators;
 * if a sequence of words is enclosed in {curly brackets} then it's treated as a single word.


 * I receive the error "Unknown glossing abbreviation(s)".
 * See above for details, but in short:
 * If this was not intended as a glossing abbreviation, enclose it in no gloss.
 * To set the meaning of one instance of a glossing abbreviation, format that instance with gcl, for example.
 * If the abbreviation occurs several times within the same example then it might be easier to use the abbreviations parameter, for example: PF:perfective aspect.

TemplateData
{	"params": { "1": {			"label": "First line of interlinear text", "type": "string", "required": true, "description": "It is italicised by default (unless the parameter \"italics1\" is set to \"no\")." },		"2": {			"label": "Second line of interlinear text", "type": "string", "suggested": true, "description": "By default, this is expected to contain the glosses. If there are any glossing abbreviations, they will be expanded (unless the parameter \"glossing2\" is set to \"no\")." },		"3": {			"label": "Third line of text", "type": "string", "suggested": true, "description": "If it is the last line, it is assumed to be the translation and so will not be interlinearised. To force the last line to be interlinearised, then add a new, empty, line after it." },		"4": {			"label": "Fourth line of text.", "type": "string" },		"5": {			"label": "Fifth line of text", "type": "string" },		"lang": { "label": "Language of the text", "description": "ISO 639 code of the language.", "type": "string" }	},	"description": "This template formats interlinear glossed text.\nOnly a few of the capabilities of this template are documented here. For all options, see its documentation. Alignment is automatic, so there is no need to add padding either inside or around the template." }