LaTeX/Document Structure

The main point of writing a text is to convey ideas, information, or knowledge to the reader. The reader will understand the text better if these ideas are well-structured, and will see and feel this structure much better if the typographical form reflects the logical and semantic structure of the content.

Given only the logical and semantical structure of a text, LaTeX derives the typographical form of the text according to the “rules” given in the document class file and in various style files. LaTeX allows users to structure their documents with a variety of hierarchical constructs, including chapters, sections, subsections and paragraphs.

Global structure
When LaTeX processes an input file, it expects it to follow a certain structure. Thus every input file must contain the commands

The area between and  is called the preamble. It normally contains commands that affect the entire document.

After the preamble, the text of your document is enclosed between two commands which identify the beginning and end of the actual document:

You would put your text where the dots are. The reason for marking off the beginning of your text is that LaTeX allows you to insert extra setup specifications before it (where the blank line is in the example above: we'll be using this soon). The reason for marking off the end of your text is to provide a place for LaTeX to be programmed to do extra stuff automatically at the end of the document, like making an index.

A useful side-effect of marking the end of the document text is that you can store comments or temporary text underneath the in the knowledge that LaTeX will never try to typeset them:

Document classes
When processing an input file, LaTeX needs to know which layout standard to use. Layouts standards are contained within 'class files' which have .cls as their filename extension.

Here, the  parameter for the command   specifies the .cls file to use for the document. It is recommended to put this declaration at the very beginning. The LaTeX distribution provides additional classes for other layouts, including letters and slides. It is also possible to create your own, as is often done by journal publishers, who simply provide you with their own class file, which tells LaTeX how to format your content. But we'll be happy with the standard article class for now. The  parameter customizes the behavior of the document class. The options have to be separated by commas.

Example: an input file for a LaTeX document could start with the line

which instructs LaTeX to typeset the document as an article with a base font size of 11 points, and to produce a layout suitable for double sided printing on A4 paper.

Here are some document classes that can be used with LaTeX:

Here is a comprehensive list of document classes.

The generic document classes that come with LaTeX offer some layout flexibility, which is why they have a lot of options in common. Non-generic classes (those provided by university departments or publication houses) may have different options than those shown below or no options at all. Normally, third-party classes come with their own documentation. The most common options for the generic document classes are listed in the following table:

For example, if you want a report to be in 12pt type on A4, but printed one-sided in draft mode, you would use:

Packages
While writing your document, you will probably find that there are some areas where basic LaTeX cannot solve your problem. If you want to include graphics, colored text or source code from a file into your document, you need to enhance the capabilities of LaTeX. Such enhancements are called packages. Some packages come with the LaTeX base distribution. Others are provided separately. Modern TeX distributions come with a large number of packages pre-installed. The command to use a package is pretty simple: :

command, where package is the name of the package and options is a list of keywords that trigger special features in the package. For example, to use the package, which lets you typeset in colors, you would type:

You can pass several options to a package, each separated by a comma.

Top matter
At the beginning of most documents there will be information about the document itself, such as the title and date, and also information about the authors, such as name, address, email etc. All of this type of information within LaTeX is collectively referred to as top matter. Although never explicitly specified (there is no command) you are likely to encounter the term within LaTeX documentation.

A simple example:

The, , and commands are self-explanatory. You put the title, author name, and date in curly braces after the relevant command. The title and author are usually compulsory (at least if you want LaTeX to write the title automatically); if you omit the command, LaTeX uses today's date by default. You always finish the top matter with the command, which tells LaTeX that it's complete and it can typeset the title according to the information you have provided and the class (style) you are using. If you omit, the title will never be typeset.

Using this approach, you can only create a title with a fixed layout. If you want to create your title freely, see the Title Creation section. You should remember, however, that the goal of LaTeX is to leave formatting to the documentclass designer, and if you wish to submit your work to multiple publishers then you should avoid designing a custom title.

Abstract
As most research papers have an abstract, there are predefined commands for telling LaTeX which part of the content makes up the abstract. This should appear in its logical order, therefore, after the top matter, but before the main sections of the body. This command is available for the document classes article and report, but not book.

By default, LaTeX will use the word "Abstract" as a title for your abstract. If you want to change it into anything else, e.g. "Executive Summary", add the following line before you begin the abstract environment:

Sectioning commands
The commands for inserting sections are fairly intuitive. Of course, certain commands are appropriate to different document classes. For example, a book has chapters but an article doesn't. Here are some of the structure commands found in simple.tex.

Notice that you do not need to specify section numbers; LaTeX will sort that out for you. Also, for sections, you do not need to use and  commands to indicate which content belongs to a given block.

LaTeX provides 7 levels of depth for defining sections (see table below). Each section in this table is a subsection of the one above it.

All the titles of the sections are added automatically to the table of contents (if you decide to insert one). But if you make manual styling changes to your heading, for example a very long title, or some special line-breaks or unusual font-play, this would appear in the Table of Contents as well, which you almost certainly don't want. LaTeX allows you to give an optional extra version of the heading text which only gets used in the Table of Contents and any running heads, if they are in effect. This optional alternative heading goes in [square brackets] before the curly braces:

Section numbering
Numbering of the sections is performed automatically by LaTeX, so don't bother adding them explicitly, just insert the heading you want between the curly braces. Parts get roman numerals (Part I, Part II, etc.); chapters and sections get decimal numbering like this document, and appendices (which are just a special case of chapters, and share the same structure) are lettered (A, B, C, etc.).

You can change the depth to which section numbering occurs, so you can turn it off selectively. By default it is set to 3. If you only want parts, chapters, and sections numbered, not subsections or subsubsections etc., you can change the value of the counter using the  command, giving the depth level you wish. For example, if you want to change it to "1":

A related counter is, which specifies what depth to take the Table of Contents to. It can be reset in exactly the same way as. For example:

To get an unnumbered section heading which does not go into the Table of Contents, follow the command name with an asterisk before the opening curly brace:

All the divisional commands from to  have this "starred" version which can be used on special occasions for an unnumbered heading when the setting of  would normally mean it would be numbered.

If you want the unnumbered section to be in the table of contents anyway, use package. It provides the command

which will take care of a proper header as well. and  are also available. KOMA classes provide those commands by default.

If you don't want to use package unnumberedtotoc, you have to do everything by hand using  and   (or even  ).

Note that if you use PDF bookmarks you will need to add a phantom section so that hyperlinks will lead to the correct place in the document. The command is defined in the  package, and is Commonly used like this:

For chapters you will also need to clear the page (this will also correct page numbering in the ToC):

Section number style
See Counters.

Ordinary paragraphs
Paragraphs of text come after section headings. Simply type the text and leave a blank line between paragraphs. The blank line means "start a new paragraph here": it does not mean you get a blank line in the typeset output. For formatting paragraph indents and spacing between paragraphs, refer to the Paragraph Formatting section.

Table of contents
All auto-numbered headings get entered in the Table of Contents (ToC) automatically. You don't have to print a ToC, but if you want to, just add the command at the point where you want it printed (usually after the Abstract or Summary).

Entries for the ToC are recorded each time you process your document, and reproduced the next time you process it, so you need to re-run LaTeX one extra time to ensure that all ToC pagenumber references are correctly calculated. We've already seen how to use the optional argument to the sectioning commands to add text to the ToC which is slightly different from the one printed in the body of the document. It is also possible to add extra lines to the ToC, to force extra or unnumbered section headings to be included.

The commands and  work in exactly the same way as  to automatically list all your tables and figures. If you use them, they normally go after the command. The command normally shows only numbered section headings, and only down to the level defined by the  counter, but you can add extra entries with the  command. For example if you use an unnumbered section heading command to start a preliminary piece of text like a Foreword or Preface, you can write:

This will format an unnumbered ToC entry for "Preface" in the "subsection" style. You can use the same mechanism to add lines to the List of Figures or List of Tables by substituting or  for. If the hyperref package is used and the link does not point to the correct chapter, the command in combination with  or  can be used (see also Labels and Cross-referencing):

To change the title of the ToC, you have to paste this command in your document preamble. The List of Figures (LoF) and List of Tables (LoT) names can be changed by replacing the with  for LoF and  for LoT.

Depth
The default ToC will list headings of level 3 and above. To change how deep the table of contents displays automatically the following command can be used in the preamble:

This will make the table of contents include everything down to paragraphs. The levels are defined above on this page. Note that this solution does not permit changing the depth dynamically.

You can change the depth of specific section type, which could be useful for PDF bookmarks (if you are using the package) :

In order to further tune the display or the numbering of the table of contents, for instance if the appendix should be less detailed, you can make use of the package (CTAN, doc).

Book structure
The standard LaTeX class follows the same layout described above with some additions. By default a book will be two-sided, i.e. left and right margins will change according to the page number parity. Furthermore current chapter and section will be printed in the header.

If you do not make use of chapters, it is barely useful to use the class.

Additionally the class provides macros to change the formatting of some places of the document. We will give you some advice on how to use them properly.


 * The frontmatter chapters will not be numbered. Page numbers will be printed in roman numerals. Frontmatter is not supposed to have sections, so they will be numbered because there is no chapter numbering. Check the Counters chapter for a fix.
 * The mainmatter chapters works as usual. The command resets the page numbering. Page numbers will be printed in arabic numerals.
 * The macro can be used to indicate that following sections or chapters are to be numbered as appendices. Appendices can be used for the article class too:

Only use the macro once for all appendices.


 * The backmatter behaves like the frontmatter. It has the same issue with section numbering.

As a general rule you should avoid mixing the command order. Nonetheless all commands are optional, so you might consider using only a few.

Note that the special content like the table of contents is considered as an unnumbered chapter.

Page order
This is one traditional page order for books.


 * Frontmatter
 * 1) Half-title
 * 2) Empty
 * 3) Title page
 * 4) Information (copyright notice, ISBN, etc.)
 * 5) Dedication if any, else empty
 * 6) Table of contents
 * 7) List of figures (can be in the backmatter too)
 * 8) Preface chapter


 * Mainmatter
 * 1) Main topic


 * Appendix
 * 1) Some subordinate chapters


 * Backmatter
 * 1) Bibliography
 * 2) Glossary / Index

Special pages
Comprehensive papers often feature special pages at the end, like indices, glossaries and bibliographies. Since this is quite a complex topic, we will give you details in the dedicated part Special Pages.

Notes and references
LaTeX/Структура документа LaTeX/Структура документа