HydroGeoSphere/Selecting Zones

These instructions can be used to alter the set of chosen zones for the current zone type (i.e. porous media, dual, fracture or surface.)

Clear chosen zones
Returns the set to the default state, in which no zones are chosen. This is recommended if you are unsure of which zones are chosen due to previously issued instructions.
 * &bull; &bull; &bull;

Choose zones all
Selects all zones. This is useful if you wish to assign a property to all zones in the grid.
 * &bull; &bull; &bull;

Choose zone number

 * 1) num_zone Zone number.

Selects the zone numbered num_zone.
 * &bull; &bull; &bull;