De-chroming chromebooks/Flashing Tutorials/Acer C710

Flashing_stock_firmware_to_a_coreboot_build|bridge and developer mode md5sum: 1a4cbde266bdf5572c019274abc64a52 md5sum: 9c312fbb7164acb31fb6e130b991ebc9 md5sum: 9c5993518ddf97ab4c4cf7e0a2f84570 md5sum: 4bfb10dbd10380d78bc6b4c501adcd10
 * 1) To remove C710 back cover:
 * 2) Undo 1 screw under warranty sticker. Motherboard Diagram
 * 3) Slide battery removal latch and hold.
 * 4) Remove battery.
 * 5) Release battery removal latch.
 * 6) Push back cover away from battery until free.
 * 7) To bridge hardware write-protect jumper: Write protect jumper
 * 8) * Your write-protect jumper may be under a black plastic tab (not present on C710-842G32ii). You will need to remove this for the next step.
 * 9) * Carefully fold a 1 2 inch piece of tin foil and wedge it between the 2 pins of the write-protect jumper, closing the circuit, making sure it is secure.
 * 10) Replace back cover, battery, connect AC power source and boot into ChromeOS.
 * 11) If you're not already in developer mode (You are if you see the OS verification warning at boot.):
 * 12) Hold Escape+Refresh(F3) and press the power button.
 * 13) Hit Ctrl+D at the Recovery screen. Confirm.
 * 14) * SeaBIOS for Intel Celeron 1007U (NU.SH7AA.02x)
 * 1) * SeaBIOS for Intel Celeron 847
 * 1) * Grub2 for Intel Celeron 847
 * 1) * Windows for Intel Celeron 847
 * 1) Repeat Step 5 & remove tin foil inserted in Step 6.
 * 2) Replace back cover, battery and insert bootable USB stick created in Step 3 and power up the C710.