DD-WRT/Features

Table of Contents

 * Supported devices
 * Features
 * "Flashing" instructions
 * General instructions
 * Linksys_WRT54G_v5/v5.1/v6
 * References

Features
These are the features available in the Standard version of DD-WRT. Other versions, such as the Micro or Mini, may lack some specific features to lower the package size.

''This list uses content from the WRT Wiki article "What is DD-WRT" as retrieved on September 24, 2006, which is licensed under the GNU Free Documentation License 1.2. This article is in turn, as with all Wikibooks articles are licensed under the GNU Free Documentation License 1.2.''


 * 13 languages
 * 802.1x (EAP (Extensible Authentication Protocol) encapsulation over LANs)
 * Access Restrictions
 * Adhoc Mode
 * Afterburner
 * Client Isolation Mode
 * Client Mode (supports multiple connected clients)
 * Client Mode WPA
 * DHCP Forwarder (udhcp)
 * DHCP Server (udhcp or Dnsmasq)
 * DNS forwarder (Dnsmasq)
 * DMZ
 * Dynamic DNS (DynDNS, easyDNS, FreeDNS, No-IP, TZO, ZoneEdit, custom, and others)
 * Hotspot Portal (Sputnik Agent ,Chillispot)
 * IPv6 Support
 * JFFS2
 * MMC/SD Card Support (hardware modification required)
 * NTP client in a client-server basis
 * Ntop Remote Statistic
 * OpenVPN Client & Server (only in -vpn build of the firmware)
 * Port Triggering
 * Port Forwarding (max. 30 entries)
 * PPTP VPN Server & Client
 * QoS Bandwidth Management (Optimize for Gaming and Services / Netmask / MAC / Ethernet Port Priority)
 * QoS L7 Packet Classifier l7-filter)
 * RFlow/MACupd
 * Routing: Static entries and Gateway, BGP, OSPF & RIP2 via (BIRD)
 * Samba FS Automount
 * Syslog to remote server
 * Rx/Tx Antenna (Select or Auto)
 * Show Status of Wireless Clients and WDS with System Uptime/Processor Utilization
 * Site Survey
 * SNMP
 * SSH server & client (dropbear)
 * Startup, Firewall, and Shutdown scripts (startup script)
 * Static DHCP Assignment
 * Style (Changeable GUI; v.23)
 * Supports New Devices (WRT54G V3, V3.1, V4, V5 and WRT54GS V2.1, V3, V4)
 * Telnet server & client
 * Transmit Power Adjustment (0-251mW, default is 28mW, 100mW is safe)
 * UPnP
 * VLAN
 * Wake On Lan client (WOL)
 * WDS Connection Watchdog
 * WDS Repeater Mode
 * Wireless MAC Addresses Cloning
 * Wireless MAC filter
 * WMM (Wi-Fi MultiMedia QoS)
 * WPA over WDS
 * WPA/TKIP with AES
 * WPA2
 * Xbox Kaid (Kai Engine)