Alcor6L/eLua/pwm

This module contains functions for accessing the PWM (Pulse Width Modulation) modules of the eLua CPU.

=Functions=

pwm.setup
Setup the PWM modules.

frequency = pwm.setup( id, frequency, duty )


 * id - the ID of the PWM module.
 * frequency - the frequency of the PWM module (in Hz).
 * duty - the duty cycle of the PWM module given in percents. This must be an integer between 0 and 100. Depending on the hardware, some duty cycles (particularly 0 and 100) might not be achievable.

Returns:
 * frequency - The actual frequency set on the PWM module. Depending on the hardware, this might have a different value than the frequency argument.

pwm.start
Start the PWM signal on the given module.

pwm.start( id )


 * id - the ID of the PWM module.

Returns: nothing.

pwm.stop
Stop the PWM signal on the given module.

pwm.stop( id )


 * id - the ID of the PWM module.

Returns: nothing.

pwm.setclock
Set the base clock of the given PWM module.

clock = pwm.setclock( id, clock )


 * id - the ID of the PWM module.
 * clock - the desired base clock.

Returns:
 * clock - The actual base clock set on the PWM module. Depending on the hardware, this might have a different value than the clock argument.

pwm.getclock
Get the base clock of the given PWM module.

clock = pwm.getclock( id )


 * id - the ID of the PWM module.

Returns:
 * clock - The base clock of the PWM module.