360 Assembly/360 Instructions/DR

DR - Divide by Register - Opcode 1D

Format

 * DR 2,7

The specific syntax is
 * DR target register, source register.


 * The first argument is a one with lesser number of pair of target registers which value is affected by the instruction.
 * The second argument is the source value register.

Availability
The DR instruction is available on all models of the 360, 370 and z/System.

Operation
The DR instruction divides the dividend - 64-bit signed value stored in pair of registers T and T+1, where T is target register number (T shall contain most significant part and T+1 shall contain least significant part), by the divisor - 32-bit signed value in the source register. The target register number T shall be even. The instruction places quotient to register T and remainder to register T+1, both as 32-bit signed values.

The divisor shall not be zero. The quotient shall fit into limits of 32-bit signed value (-2147483648 till 2147483647).

The DR instruction performs so-called T-division when quotient is truncated to zero; the remainder sign is equal to the dividend sign, if both values are not equal to 0; in other words, (remainder * dividend >= 0).

The Condition Code field in the Program Status Word is not changed.

Exceptions and Faults

 * If an odd register number is specified as the target register, operation exception occurs.
 * If the divisor is zero, operation exception occurs.
 * If signed integer overflow is detected and the bit 36 in PSW is set, operation exception occurs.

Example
Consider that register 4 contains 0, 5 - 13 and 11 - 4. The instruction "DR 4,11" will divide the contents of register 13 by 4, place the quotient (equals to 3) in register 4 and place the remainder (equals to 1) in register 5.

Related instructions

 * To divide by word value from memory, see D.
 * To multiply by word value from register, see MR.
 * To subtract word value from register, see SR.
 * To add value and set condition codes according to unsigned arithmetic, or add not most significant part of multi-word integer value, see AL or ALR.
 * To divide floating-point values, see DER, DDR, DE or DD.